Skip to content

Every window option in plain words, free in-home estimate: (714) 908-4904

Santa Ana · Garden Grove · Orange · Costa Mesa

(714) 908-4904
Installer seen from behind pressing a new white window into a stucco wall opening on a covered back patio, old window leaning nearby, tools and caulk gun in front

Window Replacement in Santa Ana, With Each Choice Made Clear

We replace windows, sliding doors and multi-folding doors, and build custom glass railings, for homeowners in Santa Ana, Tustin and Garden Grove. Before you choose anything, we walk you through frames, glass and installation methods in plain terms, so you know what you are buying and why it fits your home.

  • $2 million insurance coverage
  • 12 years in business
  • 30 years installation experience
  • Free in-home estimates

How We Work With You

A window is a long purchase that you live with every day. We would rather you understand the choice than simply sign for it.

Terms explained, not thrown at you

U-factor, solar heat gain, low-E coatings, retrofit versus full-frame. We explain each one at your kitchen table and show you where it appears on the label of the window you are considering.

An estimate with no pressure

Our in-home estimates are free, with no sales pressure or obligation. We measure, answer your questions, and the written price stays with you so you can decide when you are ready.

Care for finish and surroundings

We lay drop cloths inside, protect plantings outside and keep cut stucco and old frames contained. New windows are sealed, trimmed and cleaned so the finished opening looks deliberate, not patched.

Long installation background

The people fitting your windows bring decades at the trade. They have seen what goes wrong with a poorly shimmed frame or a skipped sill pan, and they install to avoid it.

A fair price you can compare

If another contractor or a USA-made window supplier gives you a lower estimate, we will beat it. Bring us the other quote and we will go over it line by line with you.

Windows, Doors and Glass for Your Home

Most of our work is window replacement: taking out tired aluminum or failing dual-pane units and fitting new ones that seal, open smoothly and cut heat gain. We also handle new window installation, window retrofitting that leaves your stucco in place, and energy efficient windows chosen around your exposure. For openings larger than a window, we do sliding door replacement, multi-folding doors and custom glass railings. Each service page explains what that job involves and what affects its cost.

  • Installer in work gloves and tool belt setting a new white double-hung window into an opening in a red brick wall, with a ladder against the eave

    Window Replacement

    New vinyl or fiberglass windows built to your openings, with frame, glass and installation choices explained clearly before anything is ordered.

  • Installer holding a removed white sliding glass door panel on a concrete patio beside the open door frame of a stucco house, with a ladder and tool bag nearby

    Sliding Door Replacement

    New sliding glass doors that glide on fresh rollers, seal against dust and drafts, and use dual-pane safety glass, with each frame and glass choice explained before you decide.

  • Installer pressing black flashing tape around a new white vinyl sliding window set in a house-wrapped wall, with a ladder and tape roll nearby

    Window Installation

    New windows set into additions, remodels and freshly framed openings, flashed into the wall and finished to match your home.

  • Black-framed multi-panel folding glass door partly folded open on the back wall of a stucco house, opening onto a concrete patio, with a ladder leaning nearby

    Multi-Folding Doors

    Glass panels that fold and stack to one side so a whole wall opens to the yard, with the track, sill and layout choices explained before you decide.

  • Installer seen from behind caulking around a white vinyl insert window set in an old wood frame on a tan stucco house wall, ladder leaning nearby

    Window Retrofitting

    Replace worn aluminum windows without cutting into stucco, using flush-fin or insert frames made to fit your existing openings.

  • Over-the-shoulder view of an installer in gloves fitting a new tinted double-pane sliding window from inside, with foam sealing the gaps around the frame

    Energy Efficient Windows

    Dual-pane, Low-E windows chosen by their rating labels, so your home stays cooler in summer and quieter all year.

  • Installer in gloves sets a clear glass railing panel into a metal base along the edge of a wooden deck behind a stucco house, with a mallet, tape measure and tool bag nearby

    Custom Glass Railings

    Frameless, post-mounted and standoff glass railings for balconies, decks and stairs, measured on site and built to the code that applies to your home.

Two installers kneel at a stucco home's front entry, fitting wood shims under a new dark door threshold, with a drill, caulk gun and tool bag on the porch.

About Our Company

We are a window and door company working in Santa Ana and the surrounding part of Orange County. Many of the homes we see were built with thin aluminum sliders that let in heat, noise and dust, and replacing them is the core of what we do.

Our approach is simple. We explain what you are looking at, give you a written price and install carefully. Many of our customers tell us the part they valued most was finally understanding the difference between options that every other salesperson simply called better.

In business
12 years in business; 30 years of window installation experience
Insurance
$2 million insurance coverage

How a Window Replacement Job Runs

Five steps take you from a phone call to new windows in place. You know what comes next at each one.

  1. 1

    A phone call to set a visit

    You tell us roughly how many windows or doors you have in mind, and we arrange a free in-home estimate at a time that works for you.

  2. 2

    Measuring and talking it through

    We measure every opening, check frames and sills for rot or movement, and lay out frame and glass options in plain terms. You get a written estimate before we leave or shortly after.

  3. 3

    Ordering and scheduling

    Once you approve, we order windows built to those measurements. We confirm an installation date when they arrive and handle any permit your city requires.

  4. 4

    Installation day

    We cover floors and furniture, take out the old units, set and level the new ones, then seal and trim each opening. Most rooms are disturbed for only part of the day.

  5. 5

    Final check and cleanup

    Before we go, we test each new sash with you so you feel how it slides and latches, and we point out how the screens come out for cleaning. The old frames and glass leave with us.

What Moves the Price of New Windows

No two homes carry the same mix of openings, so we price each job after measuring it. These are the things that make the biggest difference, and we point them out on your estimate so nothing comes as a surprise.

Your estimate is written and itemized by opening, so you can see what each window costs and adjust choices before ordering. It is free, and nothing is ordered until you approve it.

Number and size of windows
More windows usually lowers the cost per opening, since setup and trips are shared. Very large or oddly sized glass takes more material and handling.
Frame material
Vinyl is the most common choice and needs little upkeep. Fiberglass holds its shape in heat and accepts darker finishes well, at a higher cost. We explain how each behaves in strong afternoon sun.
Glass package
Dual-pane glass with a low-E coating is the baseline under state energy code. Extra coatings, argon fill, laminated glass for sound, or obscure glass for bathrooms each add to the price.
Retrofit or full-frame
A retrofit insert fits inside your existing frame and leaves the stucco alone, which keeps cost and disruption down. Full-frame replacement removes everything to the studs and means patching stucco and interior trim, but it is the right call when the old frame or framing is damaged.
Safety glass and special shapes
Code requires tempered glass near doors, tubs, showers and floors. Arches, circles and custom shapes are built to order and cost more than standard rectangles.
Access and permits
Second-story openings, tight side yards and windows behind mature landscaping take more time. Permits and inspections, where your city requires them, are listed on the estimate.

Where We Work

We are based in Santa Ana and handle window and door projects throughout the nearby cities. That includes Garden Grove, Orange, Costa Mesa, Tustin, North Tustin and Irvine, as well as Fountain Valley, Midway City, Westminster and Huntington Beach.

  • Santa Ana
  • Garden Grove
  • Orange
  • Costa Mesa
  • Tustin
  • Fountain Valley
  • North Tustin
  • Midway City
  • Irvine
  • Huntington Beach
  • Westminster

If your home is near any of these cities, give us a call and we will confirm we can schedule your free estimate.

White work van with ladders on a roof rack parked at the curb of a residential street beside a tan stucco ranch home, palm trees and overcast sky

Questions Homeowners Ask Us

Something not covered here? (714) 908-4904

What is the difference between a retrofit and a full-frame replacement?

A retrofit window slides into your existing frame and is trimmed on the outside, so the stucco and interior drywall stay untouched. A full-frame replacement removes the old frame entirely, which lets us inspect and fix the framing but requires stucco and trim patching. Retrofit suits most homes with sound frames. We show you the condition of your frames at the estimate so you can see which makes sense.

Should I choose vinyl or fiberglass frames?

Vinyl is affordable, insulates well and needs almost no upkeep, which is why most homeowners choose it. Fiberglass expands and contracts less in heat, stays rigid in large openings and holds darker colors better. If your windows face hard western sun or you want a slimmer, painted look, fiberglass is worth considering. We bring samples so you can compare the finish in person.

What do the numbers on a window label mean?

The U-factor tells you how well the window keeps heat from passing through; lower is better. The solar heat gain coefficient shows how much of the sun's heat gets in, and a lower number helps keep rooms cooler in summer. Visible transmittance tells you how much daylight comes through. We point to these on the label of each option so you can compare windows on more than looks.

How long does installation take?

It depends mostly on how many openings you are replacing and whether they are retrofit or full-frame. A retrofit window goes in faster because the stucco stays in place, while full-frame work adds patching time. We give you a realistic schedule at the estimate, before anything is ordered.

Do you have any current offers?

We offer window replacement for only $495 per window with free installation (minimum purchase of 4 windows per order; some glass size and product restrictions apply). We also offer free same day estimates. If another contractor or a USA-made window supplier has given you a lower estimate, show it to us and we will beat it. Ask about any of these when you call.

Will I need a permit?

Some cities require a permit for window replacement, especially when the opening size changes or a full-frame install is involved. When yours does, we take care of the paperwork and arrange for the inspector to come out. The permit cost is shown on your estimate, so it never shows up later as an extra.

How disruptive is installation?

We work one opening at a time, so each room is open to the outside only briefly. Floors and furniture near the windows are covered, and we vacuum and wipe down before moving on. Most of your home stays usable through the day.

Start With a Clear Look at Your Windows

We will measure your openings, explain each option in plain terms and leave you a written estimate. There is no pressure and no obligation to buy.